Free Online Article Directory. For Article Authors & Publishers
A General Summary Of Halogen Light Bulbs
There is a special type of incandescent bulb called halogen bulb. Incandescent bulbs glow as electricity passes through the thin tungsten filament. This filament is surrounded by a neutral gas made of nitrogen or an inert argon gas, which is encased in a glass bulb. The advantage of halogen lamps to ordinary incandescent lamps comes from the design of the former. Halogen bulbs have smaller encasement and the tungsten filament in the bulb is made of a halogen gas which can be either iodine or bromine. As the current passes through the tungsten wire, it glows hot and some of the atoms escape out of the filament. These tungsten vapor atoms collide with halogen gas atoms. Tungsten atoms are then re-deposited onto the filament. This process inside a halogen bulb is called the halogen cycle. This is why the filament lasts longer before burning out than the filaments of incandescent bulbs. The glass envelope is also made of quartz which withstands extremely high temperatures at which ordinary glass might burst. Halogen lamps give a characteristic crisp and white light that is brighter than any typical incandescent lamps.
The presence of the halogen inside the bulb encasement allows reversible chemical reaction with tungsten atoms. When electric current flows through the filament, it glows hot. The extremely high temperature causes some of the tungsten to vaporize into atoms. In typical incandescent bulbs, just like the ones in your table lamps, tungsten atoms gradually condense onto the inner surface of the glass bulb. This slowly leads to blackening of the bulb as well as loss of some efficiency in lighting. As this process progresses, the filament thins until it burns out and the bulb gets busted.
The rapid loss of tungsten through vaporization and deposition onto the inner glass surface is, however, delayed by halogen lamps. Incandescent bulbs use inert gas which does not chemically combine with tungsten atoms, thus, deposition of the metallic element onto the glass is not halted. A particular advantage of inert gases like argon, neon or nitrogen in these bulbs is that they do not react with hot tungsten to produce a run away chemical reaction. This has been understood by chemists and physicists centuries ago since the inception of light bulbs. If it were oxygen they used, then bulbs would not last more than a few seconds as it would rapidly oxidize hot tungsten and you would get a blackened and busted bulb in seconds.
The manufacture of halogen lamps depends on the voltage design of the bulb which in turn affects the rate of tungsten evaporation. So as voltage increases, the rate of vaporization also increases. The higher the rate of vaporization, the more halogen gas the bulb must contain. Therefore, the amount of halogen gas also depends on the voltage. Temperature also has an influence on the life span and performance of the bulbs. Halogen lamps require higher temperature so that sufficient chemical combination between the gas and tungsten atoms can occur. Manufacturers make sure that the amount of halogen is in proportion to the operating voltage of the lamp. If the voltage is too high for the amount of halogen, tungsten vaporization overwhelms the halogen cycle and the lamp darkens. If there is too much halogen, the lamp may not function properly.
Safety handling of these lamps should also be observed. Halogen lamps have glass surfaces that are closer to the filament. Thus, they are smaller but hotter than incandescent bulbs, as they should achieve the right temperature requirement for halogen cycle to be possible. Touching the bulb while it is turned on is seriously discouraged. A halogen lamp may also cause fire if situated near flammable materials. In addition, halogen bulbs are high-energy emitters and release ultraviolet radiation. Thus, it may be possible to sustain UV damage upon a certain amount of exposure. However, there are lamps whose glass surfaces have UV filter coating.
Author Resource:-
Jo is a content writer for 'Litelec' (http://www.litelec.co.uk), a UK company that specializes in the distribution of electric light bulbs, light fixtures, electrical accessories and related products for home and industrial usage which they retail at vastly competitive prices. If you want to cut down your electricity fees and also contribute to the protection of the environment then begin by using halogen light bulbs at home and if you have further cheap light bulbs requirement then have a look at Litelec.
Deciding on what to jot down in and where to have your Little one Thanks Cards require not be nerve-racking. There are plenty of fantastic little one poems and infant card sayings to pick from so actually all is left to suit your needs will be to opt for phrases that have the best that means for you personally along with your new bundle of joy.
This article looks at 5 important factors you need to consider before investing in a used ramp for a wheelchair. Remember that adhering to these factors can help you save money.
This is hardly surprising, as millions of jobs have been lost over the past few years. Do to this reality, more and more people are welcoming the idea of a home based business. Should this attitude describe you, this article will propose a number of suggestions when aiming for the right work at home opportunity.
Replacing the windows in your home is a major project, but it can be well worth the cost and effort. When you trade out your windows for energy-efficient windows, your utility costs will go down. There are many windows to choose from, so finding those that match the house will make things look great.
Installing a bathtub when you have a limited amount of space can be very tricky. Trying to squeeze in a shower stall right next to your tub can make it even more difficult for installing a standard 5' bathtub in a small bathroom. There are options for small bathtubs that one can take advantage of.
Almost every new home has an outhouse or a shed for one reason or another. An old storage for dad’s old gardening implements or a shelter for mom’s potted plants is most commonly seen. However more often than not, a shed gets neglected after a few years and ends up collecting moss and weed. Meanwhile all the implements and utilities lay dusty and unused inside. A lot can be done creatively to use the space available inside the shed in innovative ways.
![[Valid RSS feed]](http://www.articlelisted.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Jo Alelsto's Author Feed
Print This Article
Add To Favorites 